Low Pressure Molding Machine (double slide table)

Technique advantage of Epimx packaging injection machine

The Epimx is the very first packaging injection machine using plunger injection system (patent pending approval), unlike conventional packaging machine using pump for packaging, by precise servo motor and computer calculations allowed user to set parameter for different kinds of products, with precise clamping unit controlled by servo motor that makes packaging injection more precise, and easier. Epimx is your best choice that provides the most precise techniques and deliver the best service. 


Introduction of hot melt adhesive

Hot melt adhesive is resin with no volatilize, solid status in normal temperature, after melting, it becomes stable and hard to carbonized adhesive. After cured, the adhesion is widely used in auto, electric, medical industry application for sensor and water-proof packaging. For PC usage, it could be the protection packaging that is faster, more precise in a small working station than traditional dispensing process and has become the new material for packaging process. 


Epimx Hot melt adhesive packaging injection method

Epimx hot melt adhesive packaging injection method is to melt solid adhesive granule into liquid status by electric heating then injected by computer controlled plunger into package inserted electronic device, after cooling, it turns into a flat package status. the features are precise low pressure control, fast cooling molding, high efficiency with low product cost. It can reach the insulation, water proof, dust proof, shock proof, pollution proof and weatherability requirements.


Comparison table of Epimx Packaging Machine and Traditional Packaging Machine

 

Epimx Packaging Machine

Traditional Packaging Machine

Packaging style Injection style Extruder style
Packaging power type Sevor motor Pump
Packaging power adjustment 3 3 stages injection / 2 stages holding pressure 1 stage torque
Clamping power type Sevor motor Air pressure
Heat stage barrel 1 set / nozzle 1set / tank 2 set barrel 1 set / tank 1 set


Hot melt adhesive features

  • 1~50 bar extreme low inj. pressure, electric device never breaks.
  • 1~15 KN clamping force for protecting products.
  • 150~220。C low temperature melt adhesive, chip never breaks.
  • High packaging quality by servo motor inj. and JPN computer control system.
  • Servo motor for clamping unit, stable action and precise control mold venting.
  • 10~60 second cycle time reduce packaging cost.
  • Product packaged after taking out from the machine, save more space.
  • Precise and durable by using JPN servo motor and computer
  • vertical servo motor clamping system.
  • Horizontal parting line injection system.
  • Sevor motor and air pressure system.
  • FUJI 7” full color TFT-LCD touch panel controller.
  • 3 stages injection 2 stage holding pressure and 100 mold data can be saved.
  • All-electic injection system, the most precise packaging quality.
  • Dual protection of restart button and safty light curtains.


​Specifications of Injection Molding Machine

 
  Unit EP15-D25(Double Slide Table) EP15-D35(Double Slide Table)
injection mode   Vertical clamping / Horizontal injection Vertical clamping / Horizontal injection
plunger diameter mm 25 35
injection volume cm3 50 96
injection rate cm3/s 19.6 38.5
injection speed mm/s 40 40
injection pressure  kgf/cm2 50 50
nozzle stroke mm 120  120
nozzle contact force tonf 0.195 0.195
nozzle height mm 65~150 65~150
max. clamping force kn/tonf 15/1.53 15/1.53
min./max. mold thickness mm 105~350 105~350
ejector force/stroke tonf/mm 0.2/50 0.2/50
heater zone set 4 4
heater capacity kw 4 4
electricity vac 220 / 1 phase 220/ 1 phase
dimension m(LxWxH) 1.34 x 1.57 x 1.93 1.34 x 1.57 x 1.93
weight ton 1 1
 
  Unit EP25-D25(Double Slide Table) EP25-D35(Double Slide Table)
injection mode   立式關模/臥式射出 立式關模/臥式射出
plunger diameter mm 25 35
injection volume cm3 50 96
injection rate cm3/s 19.6 38.5
injection speed mm/s 40 40
injection pressure   kgf/cm2 50 50
nozzle stroke mm 120  120
nozzle contact force tonf 0.195 0.195
nozzle height mm 65~150 65~150
max. clamping force kn/tonf 15/2.5 25/2.5
min./max. mold thickness mm 105~350 105~350
ejector force/stroke tonf/mm 0.2/50 0.2/50
heater zone set 4 4
heater capacity kw 4 4
electricity vac 220 / 380 / 3 phase 220/ 380 / 3 phase
dimension m(LxWxH) 1.34 x 1.57 x 1.93 1.34 x 1.57 x 1.93
weight ton 1 1

EP15-D25(double slide table)

  • Clamping force 15 KN
  • Platen dimension : 360 x 200 mm
  • Plunger diameter : 25 mm
  • Injection volume : 50 cm³
Add to inquiry

EP15-D35(double slide table)

  • Clamping force 15 KN
  • Platen dimension : 360 x 200 mm
  • Plunger diameter : 35 mm
  • Injection volume : 96 cm³
Add to inquiry

EP25-D25(double slide table)

  • Clamping force 25 KN
  • Platen dimension : 360 x 200 mm
  • Plunger diameter : 25 mm
  • Injection volume : 50 cm³
Add to inquiry

EP25-D35(double slide table)

  • Clamping force 25 KN
  • Platen dimension : 360 x 200 mm
  • Plunger diameter : 35 mm
  • Injection volume : 96 cm³
Add to inquiry
TOP